文章詳情頁
Centos7下刪除virbr0網卡信息的方法
瀏覽：223日期：2022-06-06 14:43:14
說明：之前在CentOS7下配置過bridge，現在講bridge模式改為普通模式后，查看網卡的時候還是可以看到很多垃圾信息，想徹底刪除自己不想要的網卡配置信息，操作如下:
[root@linux-node1 ~]# ip add list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff
查看網絡列表：
[root@linux-node1 ~]# virsh net-list Name State Autostart Persistent ---------------------------------------------------------- default active yes yes
使用“virsh net-destroy default”刪除
[root@linux-node1 ~]# virsh net-destroy default Network default destroyed
從配置文件中剔除
[root@linux-node1 ~]# virsh net-undefine default Network default has been undefined
重啟libvirtd服務
[root@linux-node1 ~]# systemctl restart libvirtd.service
[root@linux-node1 ~]# virsh net-list
Name State Autostart Persistent
----------------------------------------------------------
[root@linux-node1 ~]# ip add list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link
valid_lft forever preferred_lft forever
再次查看，發現不必要的信息已經清除，清爽多了
上一條：centos7如何設置密碼規則?centos7設置密碼規則的方法下一條：virbr0虛擬網卡如何卸載?virbr0虛擬網卡的卸載方法
相關文章：
1. centos7怎么關閉ipv6僅使用ipv4?2. centos7如何快速啟動應用程序?3. CentOS7中無法找到pci find device函數的解決方法4. 在vmware虛擬機中安裝Linux系統CentOS7詳細教程5. centos7使用docker部署gitlab-ce-zh應用詳解6. CentOS7無法使用Tab鍵補全命令的解決方法7. virbr0虛擬網卡如何卸載?virbr0虛擬網卡的卸載方法8. CentOS7默認的快捷鍵怎么修改設置?9. Centos7 yum安裝git服務器10. Centos7安裝部署免費confluence wiki(知識庫)詳細操作步驟
排行榜
網公網安備